PLC Controlled Smt Cleaner For Electric Wave Soldering Furnace Jigs MT-5200

INFINITE™  MT-5200 Automatic control electric wave soldering furnace jigs cleaning machine is mainly used to clean the surface flux residuals from the wave soldering furnace jigs and fixtures. This cleaning machine can also be used to clean reflow soldering trays, filters, wave soldering jaws, chains, mesh belts, etc. MT-5200 machine is composed of a cleaning system, rinsing system, drying system, adding and draining system, filtering system, control system, etc. PLC program control makes the operation fully automated and only required one-time loading to finish all the cleaning processes; batch cleaning, automatic completion of water-based solution cleaning + water rinsing + hot air drying, and other processes. After cleaning, the fixture is already dry and can be put into use immediately.

Machine features:

1. Made from SUS304 full stainless steel structure, resistant to corrosion by acid and alkali cleaning liquid.

2. Round cleaning basket with a diameter of 1000mm can accommodate multiple fixtures at one time for batch cleaning.

3. The upper, lower, and front 3 sides for the cleaning basket are sprayed and cleaned at the same time, and the carrier rotates in the cleaning basket, full coverage, no blind spots, and dead ends.

4. Cleaning + rinsing double-station cleaning, cleaning, and rinsing independent pipelines; ensure that the fixtures are clean, dry, and odorless after cleaning.

5. The double-layer heat insulation design of the cleaning upper cover prevents scalds and protects the safety of operators.

6. Precision filtration system, recycling use of cleaning liquid and rinsing water to improve liquid use efficiency and life.

7. Automatic control of cleaning fluid, rinsing water addition, and discharge functions.

8. All pipes, angle seat valves, motors, filter barrels, etc. that are in contact with liquid are made of SUS304, and never use PVC or PPH pipes. With long-term use, there will be no water leakage, liquid leakage, and pipeline damage.

9. PLC control, one-key operation, and automatic liquid addition and drainage function, the operation is very simple.

10. One-button operation, solution cleaning, tap water rinsing, and hot air drying are completed at one time.

Machine specifications:

MT-5200 specification

Basket size: ￠1000mm ×H200mm

Sprinkler System: Above, below, front, 720° full coverage

Washing/rinsing tank capacity: 80L/80L

Washing/rinsing filter: 2mm/100um/20um

Cleaning time: 5~ 15min

Rinsing time: 1~3min

Drying time: 10~20min

Washing/rinsing pump power: 2.2KW/1.1KW

Washing liquid/rinsing water heating: 9KW/9KW, room temperature~80℃

Dry hot air heating: 9KW, room temperature~90℃

Gas source requirements: 0.5~0.7Mpa, 200~400L/min

Power requirements: 380VAC, 3Phases, 50/60HZ, 34KW

Machine size: 1400mm(L)×2000mm(W)×1450mm(H)

Machine net weight: 600KG